Hydrogen-Boost

 

 

 

 

Home     Savings     Test Results     Diesel     FAQ     Newsletter     Order     Contact

 

Home

 

Savings    

 

Test Results

 

Technical Information

 

Testimonial Video

 

Demo Video

 

Newsletter    

 

Order    

 

Contact

 

 

 

 

RV Results 20%-50% Better Mileage

 

 

       I haven't written to you in some time. Just to bring you up to speed I purchased your Hydrogen boost system over a year ago for my motor home which is powered with a Ford 7.5 liter gas engine. I did not use it much the first year just short trips but this year my wife and I went west from IA to MN ND Mt WY back through MT WY SD into IA touching NE and home to IA. Running mountains and head and cross winds I ran MPG averages all the way from just under 6 to 7.5 which I didn't think to bad beings I started with just over 5 MPG I have to mention that we pulled a 3000 pound car on a 500 pound tow dolly. 

 

Gerald E. Bentley

 

Hydrogen Boost Auto-fill Reservoir

 

       Pictured above are the most recent additions to our product line.  The unit at the bottom is the Diesel Tractor Trailer system’s Model 40SS hydrogen generator with the new snap handle fill plug and fittings needed to attach to the auto-fill reservoir with built-in heat exchanger that circulates engine coolant from the cabin heater hose circuit.  The reservoir holds 2 ½ liters of water, bringing the total refill capacity of the system to one full gallon, enabling the time between refills to be extended to 40 hours of normal gas production.  In the upper left portion of the picture is our new combination water trap and mist separator.  Also shown in the picture are the new yellow zinc coated guillotine clamps supplied for mounting the units to the frame of the vehicle.   

       The heat exchanger on the bottom of the reservoir will also become an option for the Model 40SS hydrogen generator.  The use of the heat exchanger brings the hydrogen generator up to optimum operating temperature soon after engine start-up.

        The mist separator recovers the mist produced during maximum gas production operations, thereby saving any electrolyte and water from being lost through the mist, thereby further extending the time between water fill-ups and practically eliminating the need for electrolyte replenishing.

 

 

 

Click here to ORDER NOW

Home    Savings    Test Results    Technical Information    Newsletter    Order    Contact

 

 

 

 

 

 

 

 

 

 

Home

 

Savings    

 

Test Results

 

Technical Information

 

Testimonial Video

 

Demo Video

 

Newsletter    

 

Order    

 

Contact

 


Free counters provided by Honesty.com .

 

 

 

 

 

Help

Help

Help